Single Layer Explosion Vent EX-GO-VENT

...for Explosion Venting at low Vacuum

In plants producing organic products considerable volumes of fine dust are permanently present. In the beginning it can be considered this fine dust is only combustible. However, enriched with oxygen this combustible material transforms into a highly explosive mixture.
If an ignition source is then introduced resulting in an explosion and fire, this will cause enormous consequential damage for plant and personnel. Acc. to ATEX directive 94/9/EG manufacturers are obliged to reduce the risk of a dust explosion. Explosion protection by certified explosion panels provides a cost effective and good engineered solution. i.e.: If a dust explosion occurs the explosion pressure is reduced to a harmless level within the plant. The EX-GO-VENT incorporating bionic structures guarantees extraordinary stability suitable for most standard applications. The flat, single layer explosion panel has a perfect venting efficiency due to its low specific weight. Unlike other manufacturers’ options, the EX-GO-VENT is NOT torque dependent during installation. Typically, mounting is made directly on roofs, bulkheads or round shaped equipment and provides a guaranteed leak-tight sealing against arduous weather conditions or other water ingress.

Your benefits:

	Perfect venting efficiency
	Wide range of applications
	Easy and quick mounting
	Considerable cost reductions due to integrated gasket and mounting frame

	Standard burst pressure pstat. = 0.1 barg @ 22 °C* = 1.45 psig @ 71.6 °F*
	Operating pressure or vacuum standard 50 % from pstat.*
	Temperature from -40 °C up to 180 °C* (-40 °F up to 356 °F)*
	Material: 304 stainless steel, silicon gasket (FDA compliant)
	Customised dimensions, e.g.: Triangular, Sail - or Trapezium shape, etc. in order to utilise full capacity and optimise customer equipment configuration
	Mounting without using the usual counter frame
	Direct installation on plain walls as well as on cylindrical equipment, e. g. cyclones, filters, silos, etc.
	Elimination of dead-space and product accumulation, making it suitable for sterile applications, e. g. in food industry
	Mounting possible on cylindrical walls with diameter 􀀀 3.5 m (9.8 ft)
	Round EX-GO-VENTs are also available
	* For non-standard operating conditions, e. g. higher operating pressure, vacuum, pulsation and temperature please contact epd@rembe.de or call + 49 (0) 29 61 - 74 05 - 0 to discuss your

Product Information	Division
	Explosion Venting EX-GO-VENT

Product Information

Division

Explosion Venting

EX-GO-VENT

Search